This site uses cookies and other tracking technologies to provide you with our services, enhance the performance and functionality of our services, analyze the use of our products and services, and assist with our advertising and marketing efforts.

Cookie Policy   Privacy Notice

Visit for more information about our products.

CM-69S Band-Pass Scarfing Machine

Print Print

The CM-69S Scarfing machine is a rugged, overhead type machine that has individually selectable scarfing units for conditioning the top and one edge of cold, warm, or hot slabs from ambient to hot rolling temperature (21°C/70°F to 1092°C/2000°F). The CM-69S has all the capabilities of the CM-98 in a two-sided machine.

For high production, it is desirable to employ two machines in any one of several possible arrangements. For lower tonnages, a single machine may be used. In either case, slabs must be turned over between passes if all four sides are to be scarfed.

Five sizes of the type CM-69S machine are available. The capacity ranges are shown in the following table:

Machine Model Thickness Width
CM-69S-8 125 to 420 mm
(4-15/16 to 16-1/2 in.)
630 to 1680 mm
(24-13/16 to 66 in.)
CM-69S-9 125 to 420 mm
(4-15/16 to 16-1/2 in.)
630 to 1890 mm
(24-13/16 to 74-1/4 in.)
CM-69S-10 125 to 420 mm
(4-15/16 to 16-1/2 in.)
840 to 2100 mm
(33 to 82-1/2 in.)
CM-69S-11 125 to 420 mm
(4-15/16 to 16-1/2 in.)
840 to 2310 mm
(33 to 90-3/4 in.)
CM-69S-12 125 to 420 mm
(4-15/16 to 16-1/2 in.)
1050 to 2520
(41-1/4 to 99 in.)