This site uses cookies and other tracking technologies to provide you with our services, enhance the performance and functionality of our services, analyze the use of our products and services, and assist with our advertising and marketing efforts.

Cookie Policy   Privacy Notice

Visit http://www.esab.com/ for more information about our products.

CM-99 Spot Scarfing Machine

Print Print

The CM-99 Spot Scarfing machine is a rugged, overhead type machine, with individually selectable scarfing units. The units are mounted on three separate carriages; an edge unit carriage, and two top unit carriages, which can be mechanically latched together for band pass scarfing. For spot scarfing passes on the top surface, the two carriages are unlatched and are indexed laterally across the slab. The machine will scarf cold, warm, or hot slabs from ambient to hot rolling temperature (21°C/70°F to 1092°C/2000°F). The CM-99 has all the capabilities of the CM-88 in a stationary machine.

For high production, it is desirable to employ two machines in any one of several possible arrangements. For lower tonnages, a single machine may be used. In either case, slabs must be turned over between passes if all four sides are to be scarfed.

Three sizes of the type CM-99 spot scarfing machine are available. The capacity ranges are shown in the following table:

Machine Size Scarfing Unit Thickness Width
CM-99-2-1 #8 SSU 125 to 210mm
(4-15/16 to 8-1/4 in.)		 125 to 420 mm
(4-15/16 to 16-1/2 in.)
CM-99-4-1 #8 SSU 125 to 210mm
(4-15/16 to 8-1/4 in.)		 210 to 840 mm
(8-1/4 to 16-1/2 in.)
CM-99-2-1 #9 SSU 125 to 270mm
(4-15/16 to 10-5/8 in.)		 270 to 540 mm
(10-5/8 to 21-1/4 in.)
CM-99-4-1 #9 SSU 125 to 270mm
(4-15/16 to 10-5/8 in.)		 270 to 1080 mm
(10-5/8 to 42-1/2 in.)
CM_99