Visit for more information about our products.

CM-90 Cold Scarfing Machine

Print Print

The CM-90 is a "pass-through" type machine that simultaneously scarfs all four sides of cold, warm, or hot continuous-cast or rolled slabs. Depending on the type of scarfing unit selected, the machine is capable of making "Near End" (40mm from the leading edge) or "End" starts directly on the leading edge, or end starts of flat, clean slabs. It is also capable of automatically adjusting itself to the proper size and gas coverage required for the slab cross section to be scarfed.

Several sizes of the type CM-90 machine are available. The capacity ranges are shown in the following table:

Machine Model Thickness Width
CM-90-6 153 to 548 mm
(6 to 21-9/16 in.)
650 to 1633 mm
(25-1/2 to 64-5/16 in.)
CM-90-7 153 to 548 mm
(6 to 21-9/16 in)
650 to 1905 mm
(25-1/2 to 75 in.)
CM-90-8 153 to 548 mm
(6 to 21-9/16 in)
800 to 2177 mm
(31-1/2 to 85-11/16 in)
CM-90-9 153 to 548 mm
(6 to 21-9/16 in)
800 to 2448 mm
(31-1/2 to 96-3/8 in.)